Samsung c3303 Champ Flash/Firmware without box use usb cable

Samsung c3303 Champ Flash/Firmware without box use usb cable




Prepare the Phone Driver for Flashing.
1. Turn OFF Phone.

2. Connect MicroUSB to Champ.

3. Press Volume Down + Lock key then connect USB Cable to PC

4. Install driver (Driver can be found on C3300K_Flash_loader_7.4.4_SSG_v0.5 folder, 52xdfu)(Manual install it using device manager)


When installed, get ready.


Re flashing

1. Run Flash loader 7.4.4_SSG_v0.5.exe


2. Click SET MODEL -> Select C3300_LIBRE_Setting_v02.mdl








6. Click Start

7. Turn OFF Phone.

8. Connect MicroUSB to Champ.

9. Press Volume Down + Lock key then connect USB Cable to PC

10. Wait the flashing finished.
(During the Flashing, your phone is off, then when the flashing is finish, you can see the your phone is charging.


11. Remove from USB. Turn on the Phone, Check if success,
-if failed, try nyu ulit ang mga steps.


direct download link:FLASHER DOWNOAD
direct download link:Firmware DOWNLOAD

3. MicroUSB

4. C3303k Samsung Champ Phone
5. Prepare Phone Driver

0 Response to "Samsung c3303 Champ Flash/Firmware without box use usb cable"

Posting Komentar

EDI SETIAWAN. Diberdayakan oleh Blogger.

Blogger templates

visitor

Flag Counter

Pengikut